How to Reset Epson R200, R210, R300, R310 Waste Ink Counter

Epson R200, R210, R300, R310 Waste Ink Counter Pad Reset

Here is how to reset the waste counter for the Epson R200, R210, R300 and R310 printers.

• Press and hold “Stop”, “Maintenance”, and “Power” buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don’t have a screen so just wait until the 10 seconds is up.
• Turn the printer off, unplug the power cord. Wait about 1 minute and power the printer back up. The counter will be reset. That’s all there is to the reset procedure.

Is the waste pad full ?

If the waste pad is actually full and ink is about to overflow, then you need to install a waste container. You can see the waste pad by opening the access panel on the back of the printer.

Changing the waste pad requires almost complete disassembly of the printer, it is a big job. There is an easier way.

Open the access panel on the rear of the printer (remove screw) and look inside be carefully with a flashlight. You will see a tube (down and to your left) coming from the cleaning pump and it will have an open end on it. This is the tube that delivers ink to the waste pad.

Use a piece of coat hanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, turn the access panel.

Find yourself a suitable container (Tupperware or a plastic cup or jar) that is not too tall. Put the tube into this container and secure the tube and container so they won’t come apart or lose connection if the printer is moved.

If you wish you can make a hole or notch in the access panel cover so it can be replaced.

Now the ink will go into this container and not into the waste pad inside the printer. If it gets full, dump it.

Download Software Resetter for Epson R300-310