Resetting ERROR E27 Waste Ink Absorber Full Canon PIXMA MP150/MP160

E27 Waste ink absorber full or platen waste ink absorber full Canon PIXMA MP150 Photo All In One Printer.

Take advantage of professional photo printing with a 4800 x 1200 dpi resolution. Canon’s FINE cartridges use minimum 2pl ink droplets. This delivers detailed and vivid prints for all your photos.

Canon PIXMA MP150 Photo All In One Printer Print a photo lab quality 10 x 15 cm borderless photo in approximately 55 seconds in Standard mode. Get fast borderless output from a small credit card size right up to A4. Or use the PIXMA MP150 as a standalone copier delivering up to 22 copies per minute in mono and up to 17 copies per minute in colour.

Canon PIXMA MP160 All-In-One Photo Printer there’s no need to purchase a separate scanner that will take up extra space in your office. Instead, you can rely on this compact unit to scan with a high resolution of up to 600 by 1200 dpi (optical) and 19,200 by 19,200dpi (interpolated). With a 48-bit internal color depth and the capability to deal with documents up to 8.5 x 11.7 inches, the MP160 will give you professional results in minutes.

How to clear E27 Waste ink absorber full

1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.

(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)

Note : press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks :

0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)
5.Turn off the printer.( it must be turn off) then turn it on again.