The Canon MultiPASS 360 is an ink jet printer. The ink cartridges travel in a carriage, which moves from side to side inside the machine as the ink is sprayed on pieces of paper. When you first set up the MultiPASS 360, you will need to install the ink cartridges in the carriage. Loading the ink cartridges is a simple process that should only take a few moments.
Follow the step for instruction :
Follow the step for instruction :
- Turn on the MultiPASS 360. Open the top cover of the printer until it clicks. The front cover of the printer will fall open by itself.
- Open the inner cover, which was behind the now-open front cover. The ink cartridge carriage will move to the far left of the machine.
- Take the new ink cartridges out of their packaging. Remember to remove the plastic caps from the cartridges. Place the ink cartridges into the empty slots, snapping down the side nearest you first.
- Close the printer's inner door and top cover. The printer will display a message on the LCD screen, asking if you replaced ink cartridges. Press the arrow buttons until "Yes" is selected. The printer will then ask which ink cartridge you replaced. Select "Yes" or "No" with the arrows to specify what ink cartridges you replaced.
0 comments:
Post a Comment