Know How to Reset Canon IP2770 Error 5200.
first Stage:
When the iP2770 is turned on, the printer looks normal with GREEN LED glowing on. But when we give print command, then the error code 5200 on iP2770 error will appear, and the LED will blinking 8x green 1x orange.
Procedure 1:
The printer is off and plugged the power cord.
Press the RESUME button for two seconds,
then press the POWER button until the green light glows ( while pressing the POWER button, don't released RESUME button )
Then release the Resume button, but do not release the POWER button.
POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange.
(not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then Release both of the buttons simultaneously.
Led will blink briefly and then will glow GREEN.
And the computer will detect new hardware, just ignore it.
Press the POWER button, then the printer will off.
Press the POWER button again then the printer will on and PRINTER iP2770 is ready to use.
Procedure 2 on How To Reset Canon iP2770 error 5200 :
Turn the printer, and printer will look normal.
Run the printer for printing a document or a print test, then the 5200 error will appear.
Directly unplug the power cord without pressing on/off button
Open it and slide it into the middle of its cartridges manually
Unplug all cartridges and leave the lid open
Turn on the printer, head carriage will move left and right because the lid is still open and will stop in the middle.
Replace the cartridge, and close the right
The printer will return to normal.
0 comments:
Post a Comment